P10 Outdoor Rgb Panel
Product explanation
2.1. Outdoor full color SMD Q10 C2V5Hscan module consists of red LED wafer、green LED wafer and blue LED wafer packaged as a pixel and form a matrix,and then fixed to the plastic packages;
2.2 This module contains the driver chip and chip input buffer,connected to a LEDdisplay control system to display video、image and text message;
2.3 Through OE signal to drive red LED、green LED and blue LED driver IC,can form 43980 hundred million color conversion;
2.4 This module can be spliced horizontally or vertically,thus spliced into the kind;
2.5 Module features:
- Use highlight LED and high quality plastic parts
- High contrast display can achieve a good effect
- Light weight easy to install、disassembly
- Use constant current drive LED,light uniformity,low power consumption
- Pixel pitch 8mm,total 32*16 pixel,each pixel consists of 1R1G1B
LED parameters:
package | color | brands | test current | brightness | wavelength | quantity |
3535 | R | 20mA | ≥660mcd | 615-630nm | 1 | |
G | 20mA | ≥1450mcd | 515-530nm | |||
B | 20mA | ≥300mcd | 460-475nm |
Screen technical parameters:
Module technical parameters | Pixel pitch | 10mm | Pixel density | 10000Dots/㎡ | |
Pixel constitute | 1R1G1B | Module resolution | 32*16=512Dots | ||
size(length*width*height ) | 320.0*160.0*19.1mm | weight | 0.55kg±0.05kg | ||
Structural features | IC and PCB in one | Kit materials | Polycarbonate PC | ||
Input voltage | 4.5V | Maximum current | 9.45A±0.1A | ||
consumption | ≤42.53W | Drive mode | 1/2 constant current | ||
Case technical parameters | Standard case(length*width*height) | 960mm*960mm*90mm | |||
Case resolution | 96*96=9216 Dots | ||||
Housing area | 0.9216 ㎡ | ||||
Case weight | 29.8kg±0.05 kg | ||||
Maximum consumption | 765.5W | ||||
Average consumption | 383.4W | ||||
Power distribution consumption | 981.9W | ||||
Technical parameters | brightness | 5000-5500cd/㎡ | Brightness | >0.95 | |
horizontal viewing | 140±10° | verticalviewing | 130±10° | ||
Best viewing distance | ≥10m | Deadlightsrate | Less than 3/10000 | ||
Maximumconsumption | ≤830.7W/㎡ | Environment | outdoor | ||
Power distribution consumption | 1253.7W |
System control parameter | 12-16bits | |||||
Frame rate | ≥60 | Fresh rate | ≥1920Hz | |||
Control mode | Computer control video synchronization | Brightness adjust | 256 level manually/automatic | |||
Input signal | DVI/VGA, video RGBHV、 composite video signals 、S-VIDEO YpbPr(HDTV) | |||||
System operating characteristics | Lifetime | 100,000 | NO fault time | 10,000 | ||
Decay rate(3years) | ≤15% | Constant out of control points | 0 | |||
Discrete control point | <0.0001,when leave the factory is 0 | Dead lamp rate | <0.0001 | |||
Temperature | -20 to 50℃ | Humidity | 10% to 90%RH | |||
Protective performance | Over temperature/overloaded/image compensation/correction/over current/over Voltage | |||||
Warranty | 1 year | |||||
Screen horizontal flatness | <1mm/㎡ | |||||
Screen vertical flatness | <1mm/㎡ |
Signal Pin
Pin | Signal | Function | Pin | Signal | Function |
1 | R1 | Red data signal | 2 | G1 | Green data
signal |
3 | B1 | Blue data signal | 4 | GND | GND |
5 | R2 | Red data signal | 6 | G2 | Green data
signal |
7 | B2 | Blue data signal | 8 | DND | GND |
9 | A | Line signal | 10 | B | Line signal |
11 | C | Line signal | 12 | GND | Line signal |
13 | S | Clock signal | 14 | L | Latch signal |
15 | OE | Enable signal | 16 | CS | Blanking signal |
Bir yanıt yazın