P6 Outdoor Rgb Panel
Product explanation
2.1. Outdoor full color SMD Q6 8 scan module consists of red LED wafer、 green LED wafer and blue LED wafer packaged as a pixel and form a matrix，and then fixed to the plastic packages；
2.2 This module contains the driver chip and chip input buffer，connected to a LED display control system to display video、image and text message；
2.3 Through OE signal to drive red LED、green LED and blue LED driver IC，can form 43980 hundred million color conversion；
2.4 This module can be spliced horizontally or vertically，thus spliced into the kind；
2.5 Module features：
- Use highlight LED and high quality plastic parts
- High contrast display can achieve a good effect
- Light weight easy to install、disassembly
- Use constant current drive LED，light uniformity，low power consumption
- Pixel pitch 6mm，total 32*32 pixel，each pixel consists of 1R1G1B
LED parameters：
| package | color | brands | test current | brightness | wavelength | quantity |
| 3535 | R | 20mA | ≥660mcd | 615-630nm | 1 | |
| G | 20mA | ≥1640mcd | 515-530nm | |||
| B | 20mA | ≥360mcd | 460-475nm |
Screen technical parameters：
|
Module technical parameters | Pixel pitch | 6mm | Pixel density | 27777Dots/㎡ | |
| Pixel constitute | 1R1G1B | Module resolution | 32*32=1024Dots | ||
| size(length*width*height ) | 192*192*18.3mm | weight | 0.335kg±0.05kg | ||
| Structural features | IC and PCB in one | Kit materials | Polycarbonate PC | ||
| Input voltage | 4.5V | Maximum current | 6.94A±0.1A | ||
| consumption | ≤31.2W | Drive mode | 1/8 constant current | ||
|
Case technical parameters | Standard case(length*width*height) | 768mm*768mm*90mm | |||
| Case resolution | 128*128=16384 Dots | ||||
| Housing area | 0.590 ㎡ | ||||
| Case weight | 18.5kg±0.05 kg | ||||
| Maximum consumption | 500.4W | ||||
| Average consumption | 250.2W | ||||
| Power distribution consumption | 641.7W | ||||
|
Technical parameters | brightness | 5000~5500cd/㎡ | Brightness | ＞0.95 | |
| horizontal viewing | 140±10° | verticalviewing | 130±10° | ||
| Best viewing distance | ≥6m | Deadlightsrate | Less than 3/10000 | ||
| Maximumconsumption | ≤847.8W/㎡ | Environment | outdoor | ||
| Power distribution consumption | 1278.9W | ||||
|
System control parameter | Gradation | red、green、blue each 12-16bits | color | 43980 hundred million | ||
| Frame rate | ≥60 | Fresh rate | ≥1920Hz | |||
| Control mode | Computer control video synchronization | Brightness adjust | 256 level manually/automatic | |||
| Input signal | DVI/VGA， video RGBHV、 composite video signals 、S-VIDEO YpbPr(HDTV) | |||||
|
System operating characteristics | Lifetime | ≥100,000 | NO fault time | ≥10 thousand hours | ||
| Decay rate(3years) | ≤15％ | Constant out of control points | 0 | |||
| Discrete control point | ＜0.0001，出厂时为 0 | Dead lamp rate | ＜0.0001 | |||
| Temperature | -20 至 50℃ | Humidity | 10％至 90％RH | |||
| Protective performance | Over temperature/overloaded/image compensation/correction/over current/over Voltage | |||||
| Warranty | 1 year | |||||
| Screen horizontal flatness | ＜1mm/㎡ | |||||
| Screen vertical flatness | ＜1mm/㎡ | |||||
Signal Pin
| Pin | Signal | Function | Pin | Signal | Function |
| 1 | R1 | Red data signal | 2 | G1 | Green data
signal |
| 3 | B1 | Blue data signal | 4 | GND | GND |
| 5 | R2 | Red data signal | 6 | G2 | Green data
signal |
| 7 | B2 | Blue data signal | 8 | DND | GND |
| 9 | A | Line signal | 10 | B | Line signal |
| 11 | C | Line signal | 12 | GND | Line signal |
| 13 | S | Clock signal | 14 | L | Latch signal |
| 15 | OE | Enable signal | 16 | CS | Blanking signal |
Bir yanıt yazın